Quality and reliability
Every IRONHAWK part is built at certified production sites, fully qualified for reliability, traceable to its wafer lot and covered by change control. Here is what that means and what you can ask us for.
How every part is qualified
Before a part ships, it must meet all of these:
- Certified production: wafer fab and assembly sites certified to ISO 9001, and to IATF 16949 for parts offered for automotive use.
- Complete reliability qualification to the standards in the table below, documented with test conditions, lot count, sample size and results.
- Lot traceability from every shipped part back to its wafer lot and assembly lot.
- Change control: no product or process change without advance notice to customers.
- Material compliance declared for RoHS, REACH and conflict minerals.
Every rating in our catalog has two production sources, so a disruption at one site doesn't stop your production. Published ratings hold for parts from either source.
What you can ask us for
- Qualification report for the exact part.
- Quality certificates of the production sites.
- Material declarations: RoHS, REACH (SVHC), conflict minerals (CMRT).
- Certificate of conformance with every shipment, listing part number, quantity and lot codes.
- Full characterization data: thermal, switching and capacitance data and typical curves.
- Simulation models and CAD files: SPICE and PLECS models, STEP models, PCB footprints.
Reliability qualification
Silicon-carbide devices are qualified with accelerated stress tests that age the gate oxide, the blocking junction, the package and the die attach far faster than normal use. These are the tests and typical conditions for SiC power devices. The exact conditions and results for each part are in its qualification report, which you can request from us.
| Test | Standard | Typical conditions | What it checks |
|---|---|---|---|
| High-temperature reverse bias (HTRB) | JESD22-A108 | Tj 175 °C, VDS 80–100 % of rating, 1000 h | Junction and edge-termination stability under blocking voltage |
| High-temperature gate bias (HTGB +/−) | JESD22-A108 | Maximum positive and negative VGS, 175 °C, 1000 h | Gate-oxide integrity and threshold-voltage drift |
| Dynamic gate stress | Industry practice (no JEDEC standard) | Gate switched between −VGS,min and +VGS,max, up to 1012 cycles | Threshold drift under fast gate switching, as in real converters |
| Humidity, high-voltage bias (H3TRB / HV-H3TRB) | JESD22-A101 | 85 °C, 85 % RH, up to 80 % of VDS, 1000 h | Package and passivation resistance to moisture under voltage |
| Unbiased highly accelerated stress (UHAST) | JESD22-A118 | 130 °C, 85 % RH, 96 h | Moisture resistance of the package |
| Temperature cycling (TC) | JESD22-A104 | −55 to +150 °C, 1000 cycles | Solder, die attach and bond wires under thermal expansion |
| Intermittent operating life (IOL) | MIL-STD-750, method 1037 | ΔTj ≥ 100 K, 15 000 cycles | Bond-wire and die-attach wear from self-heating |
| Power cycling, modules (PCsec, PCmin) | AQG 324 | ΔTj 75–125 K; end of life at +5 % VDS or +20 % Rth | Module lifetime under load cycles; basis for lifetime models |
| Electrostatic discharge (ESD) | JESD22-A114 (HBM), JESD22-C101 (CDM) | Rated class per part | Handling robustness |
Discrete parts for automotive use are qualified to AEC-Q101: three lots of 77 parts per stress test with zero failures. Modules are qualified to AQG 324. Conditions differ by part; the part's qualification report is the reference.
Traceability and authenticity
- Controlled supply chain. Every part ships from IRONHAWK, never from brokers or the open market, so every part is genuine.
- Lot and date code marked on every part and printed on every label.
- Traceable to the wafer lot and assembly lot through production records.
Product changes and end of life
- Change notices: every customer who bought a part is notified of any product or process change, with time to review it before changed parts ship.
- End of life: if a part is discontinued, we tell you straight away, offer a last-time buy and recommend a replacement.
Returns and failure analysis
- Report a problem to support@ironhawksemi.com with the part number, lot code and a description of the failure.
- We reply within 2 working days with a return authorization and the next steps.
- Failure analysis in a qualified failure-analysis lab. You receive the findings as an 8D report: containment, root cause and corrective action.
Handling and storage
- ESD: all parts are electrostatic-sensitive. Handle them in an ESD-protected area and keep them in their packaging until assembly.
- Moisture: surface-mount parts (D2PAK-7, TOLL, DPAK) ship dry-packed with their moisture sensitivity level on the label. Store and bake them according to IPC/JEDEC J-STD-033.
- Modules: follow the mounting torque, thermal interface and press-fit instructions in the datasheet.
Need a qualification report or certificate?
Tell us the part number and what your quality team needs. We send the documents or answer your questionnaire.